HiTEC® 11100

Passenger Car Engine Oil Additive

Key Performance Benefits

  • Robust technology that exceeds the demands of the new ILSAC GF-5 specification
  • Covers both API SN and API SN Resource Conserving license requirements
  • Approved against GM dexos1® specification with no additive modifications, boost or changes in treat rate


HiTEC® 11100 is a new additive technology designed to meet the latest ILSAC GF-5 and API SN industry requirements as well as the performance demands of the new GM dexos1® specification in cost-effective formulations. HiTEC® 11100 is designed for the manufacture of all ILSAC and non-ILSAC viscosity grades in a wide range of industry basestocks in conjunction with HiTEC® 5751 OCP VI improver (50 SSI). HiTEC® 11100 already contains a pour point depressant (PPD) and so no supplemental PPD should be necessary in order to meet low temperature properties of any of these grades. HiTEC® 11100 can also be used to meet both ILSAC GF-5 and dexos1® in an SAE 5W-30 grade using HiTEC® 5754 OCP VI improver (35 SSI) in selected basestocks to meet the more severe Noack volatility demands of the dexos1® specification. Contact Afton Chemical directly for specific instructions on obtaining a dexos1® license for your finished oil.

Recommended Dosage

HiTEC® 11100 is used at 10.1% wt. to formulate multi-grade and can also be used for mono-grade engine oils. A wide range of basestocks can be used with this technology. Please contact your Afton Chemical representative for specific formulation recommendations.

Typical Characteristics

Handling Information

Max Handling Temp: 70°C
Shelf Life: 3 months @ 50°C
36 months @ ambient (10-40°C)