HiTEC® 5710

Dispersant Polymethacrylate Viscosity Index Improver
他の地域で利用できるかどうかを問い合わせる、または当社代理店の問い合わせ先を検索する。

Key Performance Benefits

HiTEC® 5710 additive benefits include:

  • The right shear stability to maximize performance and minimize cost in ATF, tractor and other applications
  • Facilitates the flexibility to use Group I or II base oils in many applications
  • Adds cleanliness properties which may reduce the overall cost of the formulation by lowering the dosage of additional dispersants
  • Exceptional low temperature properties even after the lubricant has been subject to oxidation
  • Used by OEMs in factory fill applications
  • Good handling characteristics

Application

AHiTEC® 5710 Viscosity Index Improver is based on dispersant polymethacrylate (PMA) chemistry and is recommended for a range of applications where low temperature properties and shear stability are important. In addition, HiTEC® 5710 additive provides dispersancy which benefits oxidation and cleanliness properties of the lubricant. HiTEC® 5710 additive is particularly suited to automatic transmission fluids and tractor hydraulic fluid formulations. 

Aviation turbine fuel produced against the DefStan 91-091 specification requires a conductivity of between 50 pS/m and 600 pS/m. Only aviation approved static dissipater additives such as AvGuard™ SDA can be used to achieve this.

Recommended Dosage

Please contact your Afton Chemical representative for specific recommendations.

Typical Characteristics

Handling Information

Max Short Term Handling Temp: 100˚C
Shelf Life: 36 months @ ambient temperature

Formulation Examples

Tractor Formulation Example



ATF Formulation Example