Understanding Low Speed Pre-Ignition (LSPI)
Unleash Vehicle Performance
Low-speed pre-ignition (LSPI) is a roadblock to better-performing and more fuel-efficient vehicles. Afton Chemical is putting its extensive chemical and engineering expertise, broad R&D capabilities, and global partnerships to action to develop holistic LSPI solutions.
The goal: reduce or eliminate LSPI occurrences – and unleash the full engineering power of the world’s leading automakers to take vehicle performance to the next level.
The Barrier to Better Vehicles
Improved fuel economy is the single greatest pressure driving automotive design today and into the future.
U.S. regulations will see passenger car fuel economy standards jump from an average of 35.5 mpg in 2016 to 54.5 mpg in 2025. Even more aggressive standards have been proposed in Europe and Asia.
Today, automakers are using advanced engineering to design fuel-efficient cars that complement alternate technology such as hybrids and electrics. Most notably, smaller engines – using turbocharge and supercharge technologies, reduced engine speed, and higher pressure direct injection – are helping take fuel economy to new levels.
But this new level of performance has come with an unexpected side effect: LSPI.
LSPI, also known as stochastic pre-ignition (SPI), megaknock, superknock and deto-knock, most commonly occurs at low speeds during a period of rapid acceleration. A premature ignition in the combustion chamber, generated prior to the spark plug firing, causes an abnormal combustion and high cylinder pressure. The LSPI event results in a loud knocking sound from the uncontrolled pressure rise in the cylinder. In some cases, a single LSPI event is sufficient to cause severe engine damage.
Until LSPI is rectified, automakers may be restricted in their ability to maximize the performance and fuel efficiency of their advanced engine designs, creating a barrier to meet tomorrow’s demanding fuel-performance requirements.
Developing a Holistic Solution
LSPI occurs in the combustion chamber, and the most practical solution is a holistic solution that takes into account engine design, engine oil formulation and fuel quality. A possible solution may likely come from an engine oil additive solution to retain the proven fuel-saving benefits of existing engine technologies.
The next wave of engine oil performance standards, including ILSAC GF-6 and next generation GM dexos1™, take aim at LSPI. However, any LSPI solution must retain the robust range of benefits that lubricants provide today.
A holistic solution will need to reduce or eliminate LSPI while still providing:
- Engine Durability: To preserve the chief function of engine oil, a formulation must be able to cool, lubricate and clean engines to reduce wear and maximize service life.
- Oil Durability: Oil additives, such as viscosity modifiers, ensure oil performs in both hot and cold weather, while performance additives ensure oil remains clean, durable and effective.
- Fuel Economy: Today more than ever, oils depend on friction modifiers to help maximize the amount of usable energy, while maintaining stable viscosity to reduce engine drag.
- Backwards Compatibility: The average age of a light vehicle in the U.S. is more than 11 years old. Tomorrow’s lubricants must address LSPI in the vehicles of today, yet remain fully compatible and effective in the vehicles of yesterday.
Meeting automakers’ increasing expectations of engine performance is best achieved through the innovation and creativity of holistic solutions. Discouraging the innovation process by imposing unnecessary restrictions on engine oil formulation and composition is counter to achieving these goals.
Working from an unconstrained spectrum of ingredients and technologies, the industry can better understand and manage the role of LSPI “bad actors” while elevating the role of “good actors” and encouraging continued creativity and innovation.
Perspectivas publicadas recientemente
enero 03, 2023
Struggling with Lithium? Reformulate with Confidence!
octubre 28, 2022
eMobility Fluids, a Podcast with Lubrication Experts
octubre 28, 2022
octubre 19, 2022
How Test Simulation Can Drive Slideway Success
octubre 11, 2022
Afton Supports Pioneering Direct-Cooled Power Electronics
septiembre 28, 2022
Afton Chemical shares insights on key trends and how the pandemic impacted the fuels and lubricants additive industry in Asia Pacific
septiembre 13, 2022
How Friction Modifiers Work in Afton's Gasoline Performance Additives
septiembre 13, 2022
How Detergents Work in Afton’s Gasoline Performance Additives
julio 20, 2022
Afton Chemical Continues to Invest in Capabilities to Meet Growing Market Needs in Transmission Fluids and Electric Vehicles
junio 20, 2022
Introducing the New Slideway Microbotz® Guide
mayo 26, 2022
ACEA 2022 Sequences Released for HDEO
mayo 20, 2022
Afton Receives GM dexos™ 1 Gen 3 Approvals
abril 21, 2022
Afton Chemical Introduces Greenclean™ 3 Detergent Technology in North America for Diesel Fuel
marzo 01, 2022
Afton Chemical Ready to Deliver Gasoline Performance Additives Quicker to Asia Pacific
febrero 28, 2022
Re-evaluating Hybrid Fluid Chemistries