HiTEC® 11180

Passenger Car Engine Oil Additve
Текущее наличие в регионе North America
Чтобы узнать о наличии в других регионах или получить дополнительную информацию, свяжитесь со своим представителем Afton.

Key Performance Benefits

  • Fully meets the license and approval requirements of the ILSAC GF-5 and API SN specifications and has GM endorsement for approval against the dexos 1™ Gen 2 specification in selected formulations
  • Delivers enhanced performance in the areas of wear, cleanliness and fuel economy in the latest TGDI engine designs, exceeding the capabilities of market GF-5 oils
  • Provides protection against the potential for pre-ignition in TGDI designs, fully meeting both the currently defined OEM requirements and the anticipated future industry performance targets


HiTEC® 11180 is a new additive technology formulated to exceed the performance requirements of the current ILSAC GF-5 specification and address the enhanced performance demands of the latest turbocharged gasoline direct injection (TGDI) engine designs. These engines represent a more severe application for the lubricant as they:

  • Produce abrasive soot which can contribute to increased engine wear
  • Run hotter, producing an increased tendency to form performance limiting deposits
  • Have the potential for severe engine damage as a result of combustion pre-ignition

The current ILSAC GF-5 quality oils in the market may not adequately address all of these new performance demands and HiTEC® 11180 has been developed specifically to ensure optimum protection for TGDI designs.

HiTEC® 11180 continues to fully meet the licensed requirements of both ILSAC GF-5 and API SN specifications. In addition, HiTEC® 11180 can be used to meet the latest GM dexos 1™ Gen 2 approval requirements in selected approved formulations. For specific details of the range of licensed formulations that can be supported with this technology platform please contact your Afton Chemical representative.

Recommended Dosage

HiTEC® 11180 is used at 10.1% wt. to formulate all recommended grades and approved oils. Please contact your Afton Chemical representative for specific formulation recommendations.

Typical Characteristics

Handling Information